Gorilla Clear Grip, 3OZ, Tube

NEW INCREDIBLE STRONG CONTACT ADHESIVE CLEAR GRIP *NOTE: Not recommended for use on polystyrene. polypropylene or polyethylene products. Not for use on food contact surfaces. Do not dry clean. May cause damage to finished surfaces. Crystal Clear, 100%, Waterproof, Permanent Bond, Holds in Just Seconds CRYSTAL CLEAR Gorilla® Clear Grip™ is a 100% waterproof contact adhesive that provides a permanent bond and holds in just seconds. This flexible adhesive dries crystal and can be used on a variety of surfaces, making it the perfect all-purpose adhesive for your next project. Conforms to ASTM D-4236 Contact Adhesive-General Purpose ©2016 THE GORILLA GLUE COMPANY 2105 E. KEMPER ROAD, CINCINNATI, OH 45241 www.gorillatough.com 1-800-966-3458 Made in USA WITH DOMESTIC & IMPORTED MATERIALS Bonds: Metal
Glass
Fabric
Wood
Ceramic
Leather
Paper
Plastic*
and More!
Flexible
Paintable

Directions: All surfaces should be clean and free of dirt, grease and oil. Best if used between 50°F and 90°F. NOTE: Bond forms immediately and can be difficult to reposition. CURE TIME: Allow a minimum of 24 hours for full cure. Cure time may increase with lower temperatures and when used on non-porous surfaces. STORAGE: After each use, wipe nozzle with a dry cloth and tightly replace cap. Store in a cool, dry location. Tip: For easier re-opening, apply a thin coat of petroleum jelly to the threads before replacing cap. Store away from children and animals. CLEAN-UP: Wipe uncured adhessive with a dry cloth and clean with acetone, isopropyl alcohol, or citrus based solvents according to manufacturer's instructions. Cured adhesive may be removed by scraping from surface. PAINTABLE: When fully cured. Apply adhesive to each surface to be boned.
To maximize bond strength: Wait approximately two minute for adhesive to partially dry before joining surfaces.
Press surfaces firmly together.

WARNING: Reproductive Harm - www.P65Warnings.ca.gov