Microtouch Titanium Rover All-Terrain Shaver

Micro Touch Titanium Rover is the new, all-terrain, wet/dry smart shaver that instantly senses and contours to every surface for a fast, perfect shave. The 3-way independent suspension conforms to your toughest angles for maximum surface contact. Dual micro-polished stainless steel blades and twin shaving foils bonded with titanium deliver the smoothest shave over any surface. Cordless and rechargeable lithium ion for more power, and an intelligent LED status panel to take the guesswork out of shaving. Features & Benefits: Durable Titanium-plated stainless-steel foil and center blades.
Built-in Titanium-plated pop-up trimmer to edge sideburns and neck.
Wet/Dry Smart Shaver – no water, soaps, or creams needed.
No nicks or cuts
Intelligent LED Status Panel indicates charge-time remaining.
Safety storage cap preserves the all-terrain head.
Travel-lock prevents accidental "on".
Rechargeable, USB charging cord included.

See the full list of product ingredients on the product label.

Charge shaver to 100% (see CHARGING/RECHARGING below) before first use. NOTE: Prior to first use, test the product on a small area on your arm or leg. If sensitivity or allergic reactions occur, discontinue use immediately. NOTE: As with all shavers, use caution around sensitive areas to prevent nicks or cuts. Normal Shaving: Press ON/OFF button II to turn shaver on. Display will first light all segments, then show battery charge level. If it doesn't turn on, see Charging or Travel Lock below. Shave with gentle pressure against face. Pressing hard is likely to irritate skin and won't give you a closer shave. Shave with upward/downward motion, keeping foils flat against skin. After a few minutes, turn shaver sideways and use side/side motion, again keeping foils flat against skin. When finished, turn off shaver, clean, and replace cover. SHAVING LONGER GROWTH OR BEARD. If your beard is long or more than a few days growth, use the extendable trimmer to shorten beard to stubble before shaving.Slide up trimmer on back of shaver until it clicks in open position. Slowly remove beard using trimmer, with short straight motions. After shortening entire beard, slide trimmer down until it clicks, and follow normal shaving.Tips: If you experience irritation, wait a few days between shaves for first two or three weeks of use. This allows your face to adjust to the shaver. Shaver is designed for dry use, but can be used with water, if desired. Remove shave head and rinse thoroughly after use. Charging & Recharging: Turn off shaver when charging.Insert the charging cable into bottom end of shaver. Insert USB end of charging cable into power supply. Plug power supply into a wall outlet. Plug icon will show on the display when charging.Numbers on display show battery charge level. The display will show 100% when fully charged. The display will show 0% if the battery has no charge. When charging is complete, remove charging cable from the power supply, then from shaver. NOTE: Keep shaver away from water while charging. Charging shaver takes approximately 2 hours to full charge.
Shaving time of approximately 90 minutes on full charge. Charge only with the charging cable provided with this product.
Use only with included power adapter or a certified USB adapter.
TRAVEL LOCK - Prevents shaver from accidentally turning on when traveling.
To LOCK: Press and Hold the ON/OFF button for 3 seconds.The Lock symbol will appear on the LED display. If ON/OFF button is pressed while locked, the lock symbol will flash but shaver will not turn on.
To UNLOCK: Press and Hold ON/OFF button for 3 seconds. Countdown (3, 2, 1) will appear on display. Shaver will turn on after 3 seconds.

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. Use this product only for its intended household use as described in this manual. Do not use attachments not specified by the manufacturer. Charge only with the charging cable provided with this product. Use only with a USB power adapter from a certified product, such as on a computer, receptacle lamp, Class 2 power supply or automotive adaptor.Never charge this product when it has a damaged cord or plug, when it is not working properly, after it has been dropped or damaged, or after it has been dropped in water. Contact MicroTouch customer service immediately. Always check the cutting head before use. Do not use this product with a damaged or broken cutting head, as it has the potential to result in injury. Keep product, charging cord and USB power adapter away from heated surfaces. Always attach plug to product first, then to outlet. To disconnect, turn all controls to off position, then remove plug from outlet. Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered. DANGER - To reduce the risk of electrical shock: Do not reach for the MicroTouch Titanium Rover™ if it has fallen into water while charging. Unplug immediately from receptacle. The power cord and the accessories connected to it are not for immersion or for use in shower. Do not use while bathing or in a shower. Except when charging, always unplug product from the electrical outlet after charging. Do not place or store product where it is able to fall or be pulled into a tub or sink. Do not place in or drop into water or other liquid. Unplug this product before cleaning.
The battery used in this product may present are or chemical burn hazard if mistreated. Do not disassemble, heat above 200'F, crush or incinerate.