Mr. Coffee Cappuccino and Espresso Maker Steam Pressure System, 4 Cup

Equipped with a powerful frother, the Mr. Coffee® Steam Automatic Espresso and Cappuccino Machine creates rich espressos and whips up your lattes and cappuccinos to light, frothy perfection. Brew 20 ounces of espresso into the easy-to-pour glass decanter for custom serving sizes from one to four cups. Its stay-cool handle and drip-free spout make it easy to brew your favorite drinks without mess or hassle. Brews up to 4 shots of delicious espresso coffee
Steam Heat system forces hot steam through the filter for a dark, rich espresso brew
Milk frother provides frothing for creamy cappuccinos and lattes

1. Place the ceramic mug onto the drip tray and under the portafilter. 2. Plug in the machine and turn control knob on the left side of the machine to “Brew." 3. Pour in your desired amount of cold milk into a the frothing pitcher, but allow enough room for expansion of the foam (typically 1/3 or 1/2 of the top..4. Once the coffee begins to brew into the ceramic mug, interrupt the brewing process by turning the control knob to “Off," place your frothing pitcher so that the frothing wand is submerged about 1/2 -1" into the milk. 5. Turn the knob to “Steam." This will take a few seconds to heat up before bubbling. You should hear the steam coming out. If it is silent, it may mean you are out of water and no steam is coming out. If this happens, remove the frothing pitcher from the frothing wand. When you hear steam coming out, move the ceramic mug in a circular motion until desired amount of froth is reached. *It takes about 2 minutes to froth 4 oz. of milk to 165˚F heat. 6. Before removing the frothing pitcher from underneath the frothing wand, turn the control knob back into the “Brew" position to complete the brewing process. 7. When the espresso finishes brewing, turn the control knob to the “Off" position and unplug the machine. If brewing 4 cups and frothing, you may need to add additional water. 8. Follow “how to release pressure before removing water reservoir lid" on page.

Do not touch hot surfaces use handles or knobs. Scalding may occur if the lid is removed during or immediately after the brewing cycles. Allow to cool before opening the lid. The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electrical shock or injury to persons. Do not place on or near a hot gas or electric burner, or in a heated oven. To protect against fire, electric shock and injury, do not immerse cords, plugs or the appliance in water or any other liquid. Use only water in this appliance! Do not put any other liquids or foods in the water reservoir. To disconnect, turn any control to OFF, then remove plug from wall outlet.Contact your Mr. Coffee® Customer Service to arrange for replacement or repair. Do not let the cord hang over the edge of the table or counter, or touch hot surfaces. Close supervision is necessary when any appliance is used by or near children. Always be sure water reservoir cap is tightened securely before turning appliance on. To avoid possible burns to body part and/or other injury from hot steam and water, NEVER open the water reservoir cap or portafilter while your Mr. Coffee® Steam Espresso, Latte and Cappuccino Maker is turned on or as long as there is pressure in the water reservoir. Do not use appliance for other than intended use. Place the espresso maker on a hard, flat, level surface to avoid interruption of airflow underneath. This ceramic mug is designed for use with your Mr. Coffee® espresso maker. It must never be used on a range top or in any oven, including a microwave oven. Do not clean the ceramic mug with abrasive cleaners, steel wool pad or other abrasive materials. AUnplug from outlet when not in use and before cleaning. WARNING: Risk of Fire or Electric Shock. Do not remove this cover. No user serviceable parts inside. Repair should be done by authorized service personnel only.